Monday 21 August

Colour legend:

Palace Ballroom (ground floor)

Creativity&Exploration Room (first floor)

Evasion&Innovation Room (first floor)

Harmony Room (first floor)

Mosaic Room // Stoclet Room (posters, lunches, coffee Breaks)

Palace Lobby (posters, lunches, coffee Breaks)

 

08:00 – 18:00: Registration and refreshments

08:30 - 09:30: Welcome word and Plenary lecture

Agitation, mixing and transfers induced by a dispersed phase

Prof. Frédéric Risso, Professor at IMF Toulouse, France

09:30 – 18:00: POSTER SESSION

Posters will be exhibited all day. During coffee breaks and during the time slot 17:00-18:00, authors should be near their poster for presentation. List of Monday 21 August Posters

09:30 – 17:40 max: 4 parallel sessions

Session 11a: Physical chemistry of CO2 capture

Chairmen: T. Supap and D. Thomas

09:30 – 10:00: Keynote: (paper 39) Analysis of CO2 solubility and absorption heat into 1-Dimethylamino-2-propanol solution, Raphael Idem, University of Regina, Canada – CES paper

10:00 – 10:20: (paper 49) Reaction kinetics of the absorption of carbon dioxide (CO2) in aqueous solutions of sterically hindered secondary alkanolamines using the stopped-flow techniques, Zhiwu Liang, Hunan University, China – CES paper

10:20 – 10:40: (paper 104) Equilibrium solubility and enthalpy of CO2 absorption in aqueous Bis (3-aminopropyl) amine and its mixture with MEA, MDEA, AMP and K2CO3, Amar Nath Samanta, Indian Institute of Technology Kharagpur, India – CES paper

10:40 – 11:10: Coffee Break

11:10 – 11:30: (paper 37) Evaluation of the Heat Duty of Catalyst-Aided Amine-Based Post Combustion CO2 Capture, Raphael Idem, University of Regina, Canada – CES paper

11:30 – 11:50: (paper 114) Valorization of CO2 with epoxides: Influence of gas/liquid mass transfer on reaction kinetics, Alain Ledoux, INSA Rouen, France – CES paper

11:50 – 12:10: (paper 87) Kinetics of reaction between CO2 and ionic liquid-carbon dioxide binding organic liquid hybrid systems: Analysis of gas-liquid absorption and stopped flow experiments, Ozge Yuksel Orhan, Hacettepe University, Turkey – CES paper

12:10 – 12:30: (paper 38) Heat Duty, Heat of Absorption, Sensible Heat and Heat of Vaporization of 2-Amino-2-Methyl-1-Propanol (AMP), Piperazine (PZ) and Monoethanolamine (MEA) Tri - Solvent Blend for Carbon Dioxide (CO2) Capture, Raphael Idem, University of Regina, Canada – CES paper

12:30 – 14:00: LUNCH

Session 11b: Bubbles

Chairmen: A. Liné and F. Pigeonneau

14:00 – 14:30: Keynote: (paper 255) DNS with an embedded mass boundary layer approach for mass transfer from gas bubbles at moderate Reynolds numbers, Shafiul Islam, Eindhoven University of Technology, The Netherlands

14:30 – 14:50: (paper 108) Bubble rising in a 2D packed-cell: Mass transfer quantification, Abderrahmane Kherbeche, INSA Toulouse, France

14:50 – 15:10: (paper 271) High-resolution data on the bubble formation from needles with and without liquid co-flow,Corné Muilwijk, University of Limerick, Ireland

15:10 – 15:40: Coffee Break

15:40 – 16:00: (paper 248) Numerical simulation of bubble formation at a submerged orifice, Haryo Mirsandi, Eindhoven University of Technology, The Netherlands

16:00 – 16:20: (paper 99) Visualization of mass transfer around rising bubble in non-Newtonian fluids, Feishi Xu, INSA Toulouse, France

16:20 – 16:40: (paper 233) Dual emission LIF technique to measure pH field around a rising bubble, Gaopan Kong, Eindhoven University of Technology, The Netherlands

16:40 – 17:00: (paper 296) Unraveling the lifetime dispersion of antibubbles, Youen Vitry, Université libre de Bruxelles, Belgium

17:00 – 17:20: (paper 23) On modulation of isotropic turbulent flow owing to single bubble rise, Geoffrey Evans, University of Newcastle, Australia

Session 21a: Bubble columns

Chairmen: R. Mudde and A. Schumpe

09:30 – 10:00: Keynote: (paper 46) Determination of the Entropy Radial Minimum and the Various Transition Velocities in an Air-Water Bubble Column, Stoyan Nedeltchev, Helmholtz-Zentrum Dresden-Rossendorf, Germany – CES paper

10:00 – 10:20: (paper 58) A mesoscale approach for population balance modeling of bubble size distribution in bubble column reactors, Ning Yang, Chinese Academy of Sciences, China – CES paper

10:20 – 10:40: (paper 86) Simulation and Experimental Validation of Reactive Bubble Column Reactors, Mark W. Hlawitschka, TU Kaiserslautern, Germany – CES paper

10:40 – 11:10: Coffee Break

11:10 – 11:30: (paper 133) Numerical simulation of the bubble column at elevated pressure with a CFD-PBM coupled model, Tiefeng Wang, Tsinghua University, China – CES paper

11:30 – 11:50: (paper 142) On the Experimental Investigation of Gas-Liquid Flow in Bubble Columns using Ultrafast X-ray Tomography and Radioactive Particle Tracking, Salar Azizi, Helmholtz-Zentrum Dresden-Rossendorf, GermanyCES paper

11:50 – 12:10: (paper 152) Particle agglomeration studies in a slurry bubble column due to liquid bridging: Effects of particle size and sparger design, Dominic Pjontek, The University of Western Ontario, Canada – CES paper

12:10 – 12:30: (paper 6) Extraction of Information and Reconstruction Entropies from Ultrafast X-ray Tomography Data in a Bubble Column, Stoyan Nedeltchev, Helmholtz-Zentrum Dresden-Rossendorf, Germany – CES paper

12:30 – 14:00: LUNCH

Session 21b: Bubble columns

Chairmen: A.M. Billet and S. Nedeltchev

14:00 – 14:30: Keynote: (paper 139) Flow regime transitions in a bubble column, Adrian Schumpe, TU Braunschweig, Germany – CES paper

14:30 – 14:50: (paper 157) Investigations of flow structure and liquid mixing in bubble column equipped with selected internals, Anand Prakash, The University of Western Ontario, Canada – CES paper

14:50 – 15:10: (paper 26) Study of hydrodynamics and mixing induced by bubble swarms in highly viscous fluids, David Laupsien, INSA Toulouse, France

15:10 – 15:40: Coffee Break

15:40 – 16:00: (paper 85) Developing Comprehensive Correlations for Predicting Gas Holdup in Bubble Column Reactors Operating with Viscous Liquids at High-Pressure/High-Temperature Conditions, Amin Esmaeili, Polytechnique Montréal, Canada

16:00 – 16:20: (paper 71) Displacement flows in periodically moving pipe: understanding multiphase flows hosted in oscillating geometry, Faiçal Larachi, Laval University, Canada – CES paper

16:20 – 16:40: (paper 224) Influence of the bubble size distribution on bubble column stability, Dirk Lucas, Helmholtz-Zentrum Dresden-Rossendorf, Germany

16:40 – 17:00: (paper 226) Euler-Euler Modeling of Reactive Bubbly Flows, Roland Rzehak, Helmholtz-Zentrum Dresden-Rossendorf, Germany

17:00 – 17:20: (paper 241) The effect of solid loading on local gas holdup in pilot scale bubble column with industrial heat exchanger internals structure, Muthanna Al-Dahhan, Missouri S&T, USA

17:20 – 17:40: (paper 289) Interrelation of the hydrodynamics and species conversion during chemical absorption of CO2, Ragna Kipping, TU Dresden, Germany

Session 31a: Industrial applications of GL and GLS reactors

Chairmen: N. Nikacevic and V.C. Sivastrava

09:30 – 10:00: Keynote: Industrial use and development of flow/microreactors for multiphase applications, Dominique Roberge, Lonza, Switzerland

10:00 – 10:20: (paper 101) Hydrodynamics of Gas-Liquid Cocurrent Upflow in Oscillating Packed Beds for Offshore Marine Applications, Faiçal Larachi, Laval University, Canada – CES paper

10:20 – 10:40: (paper 143) Studies of a downflow bubble column: experimental investigations, Jyeshtharaj B. Joshi, Homi Bhabha National Institute, India

10:40 – 11:10: Coffee Break

11:10 – 11:30: (paper 297)Numerical modelling of subcooled flow boiling of R-134a inside a horizontal annular pipe using a mechanistic approach in OpenFOAM, Mohsen Ariana, University of Sherbrooke, Canada

11:30 – 11:50: (paper 290) Intensification of continuous hydrothermal synthesis/ treatment of inorganic particles, Philippe Eliaers, CERTECH, Belgium

11:50 – 12:10: (paper 250) Influence of process parameters on heat generation and removal in fixed bed reactors for Fischer-Tropsch synthesis, Branislav Todic, Texas A&M University at Qatar, Qatar

12:10 – 12:30: (paper 61), Hybrid electrocoagulation/electroflotation/electrodisinfiction process as a pretreatment by seawater desalination, Jean Nepo Hakiziman, Hassan II University, Morocco – CES paper

12:30 – 14:00: LUNCH

Session 31b: CO2 capture and purification processes

Chairmen: A. Ledoux and D. Thomas

14:00 – 14:30: Keynote: Environmental impact assessment of Post-Combustion amine-based CO2 Capture technology, Hélène Lepaumier, ENGIE Laborelec, Belgium

14:30 – 14:50: (paper 34) Selection of components for formulation of amine blends for post combustion CO2 capture based on the side chain structure of primary, secondary and tertiary amines, Raphael Idem, University of Regina, Canada – CES paper

14:50 – 15:10: (paper 42) Screening tests of aqueous alkanolamine solutions based on primary, secondary, and tertiary structure for blended aqueous amine solution selection in post combustion CO2 capture, Teeradet Supap, University of Regina, Canada – CES paper

15:10 – 15:40: Coffee Break

15:40 – 16:00: (paper 38bis) A flexible and robust model for low temperature catalytic desorption of CO2 from CO2-loaded amines over solid acid catalysts, Raphael Idem, University of Regina, Canada – CES paper

16:00 – 16:20: (paper 246)Parametric study of the Sour Compression Unit (SCU) process for CO2 purification applied to flue gases coming from oxy-combustion cement industries, Sinda Laribi, University of Mons, Belgium

16:20 – 16:40: (paper 35) Mass transfer studies on catalyst-aided CO2 desorption from CO2-loaded amine solution in a post-combustion CO2 capture plant, Raphael Idem, University of Regina, Canada – CES paper

Session 41a: Devices

Chairmen: J.M. Buchlin and V. Kumar

09:30 – 10:00: Keynote: (paper 231) Hybrid TFM-DPM application in CFD Simulation of Liquid-Liquid Emulsions Drop Size Distribution in Stirred Tank Reactors, Reza Farzad, Johannes Kepler University – Linz, Austria

10:00 – 10:20: (paper 129) Comparative analysis of liquid hydrodynamics in a co-current flow-through bubble column with densely packed internals via radiotracing and Radioactive Particle Tracking (RPT), Shantanu Roy, Indian Institute of Technology Delhi, India – CES paper

10:20 – 10:40: (paper 268) Characterisation of gas dispersion in filtration modules of a membrane bioreactor using electrical resistivity tomography, Elodie Suard, Irstea, France

10:40 – 11:10: Coffee Break

11:10 – 11:30: (paper 10) Volumetric mass transfer coefficient in viscous liquid in mechanically agitated fermenters - Measurement and correlation, Radim Petricek, Prague University of Chemistry and Technology, Czech Republic – CES paper

11:30 – 11:50: (paper 94) Power consumption and mass transfer in a gas-liquid-solid stirred tank reactor with various triple-impeller combinations, Yuyun Bao, Beijing University of Chemical Technology, China – CES paper

11:50 – 12:10: (paper 45) Investigating the effects of the scales of mixing on mass transfer through the free-surface in stirred tank bioreactors, Anne de Lamotte, University of Liège, Belgium

12:10 – 12:30: (paper 249) A Coupled IBM-VOF Method to Simulate 3D Multiphase Flows Through Complex Solid Geometries, Harshil V. Patel, Eindhoven University of Technology, The Netherlands

12:30 – 14:00: LUNCH

Session 41b: Industrial applications of GL and GLS reactors

Chairmen: Arturo Macchi and D. Toye

14:00 – 14:30: Keynote: (paper 213) Comprehensive process simulation of a 525 MWth petcoke CLC power plant, Odile Vekemans, Université libre de Bruxelles, Belgium

14:30 – 14:50: (paper 236) Fischer-Tropsch synthesis in conventional and milli-fixed-bed reactors: a modeling study, Nikola Nikacevic, University of Belgrade, Serbia

14:50 – 15:10: (paper 201) Reactive multiphase CFD study of chemical looping combustion in a double looping fluidized bed reactor, Yuanwei Zhang, NTNU – Trondheim, Norway

15:10 – 15:40: Coffee Break

15:40 – 16:00: (paper 76) Kinetic Study of Nitrogen doped Carbon Nanotube in a Fixed Bed, Anita Gopalkrishna Sharma, Institute of Chemical Technology Matunga, India – CES paper

16:00 – 16:20: (paper 80) A novel CFD-XDEM model for predicting liquid flow in dripping zone of blast furnace, Maryam Baniasadi, Université du Luxembourg, Luxemburg

16:20 – 16:40: (paper 259) Analysis of Airlift Photobioreactor via Computed Tomography CT and Radioactive Tracking Techniques, Muthanna Al-Dahhan, Missouri S&T, USA

16:40 – 17:00: (paper 702) Transient model of a fluorine electrolysis cell coupling electric currents, heat transfer, two-phase flow and transport of species, Julien Vukasin, Université de Montpellier, France

17:00 – 17:20: (paper 130) Investigation of two-phase (oil-water) flow in coiled geometries using "Radioactive Particle Tracking - Time of Flight (RPT-TOF)" and "Radioactive Particle Tracking - Volume Fraction (RPT-VOF)" measurements, Shantanu Roy, Indian Institute of Technology Delhi, India – CES paper

17:20 – 17:40: (paper 136) Kinetic modeling for catalytic cracking of pyrolysis oils with VGO in a FCC unit, Vimal Kumar, Indian Institute of Technology Roorkee, India – CES paper