Tuesday 22 August

Colour legend:

Palace Ballroom (ground floor)

Creativity&Exploration Room (first floor)

Evasion&Innovation Room (first floor)

Harmony Room (first floor)

Mosaic Room // Stoclet Room (posters, lunches, coffee Breaks)

Palace Lobby (posters, lunches, coffee Breaks)

 

08:00 – 18:00: Registration and refreshments

08:30 - 09:30: Plenary lecture

Evaluating large-scale robustness of bioprocesses: combining PAT and scale-down bioreactors

Prof. Peter Neubauer, Chair of bioprocess engineering at TU Berlin, Germany

09:30 – 18:00: POSTER SESSION

Posters will be exhibited all day. During coffee breaks and during the time slot 17:00-18:00, authors should be near their poster for presentation. List of Tuesday 22 August Posters

09:30 - 17:20 max: 3 parallel sessions

Session 12a: Bubbles, drops and films

Chairmen: M.W. Baltussen and Benoit Scheid

09:30 – 10:00: Keynote: Bubble dynamics occurring during the glass melting process, Franck Pigeonneau, Mines - ParisTech, France

10:00 – 10:20: (paper 2) Experimental investigation into the drag volume fraction correction term for gas-liquid bubbly flows, Dale McClure, The University of Sydney, Australia – CES paper

10:20 – 10:40: (paper 9) Interactions in droplet and particle system of near unity size ratio, Subhasish Mitra, University of Newcastle, Australia – CES paper

10:40 – 11:10: Coffee Break

11:10 – 11:30: (paper 20) Bubble pinch-off in Newtonian and non-Newtonian fluids, Huai Z. Li, ENSIC, France – CES paper

11:30 – 11:50: (paper 65) On nature of mass transfer near liquid-liquid interface in the presence of Marangoni instabilities, Jyeshtharaj Joshi, Homi Bhabha National Institute, India – CES paper

11:50 – 12:10: (paper 73) Discussion about the differences in mass transfer, bubble motion and surrounding liquid motion between a contaminated system and a clean system based on consideration of three-dimensional wake structure obtained from LIF visualization, Jie Huang, Shizuoka University, Japan – CES paper

12:10 – 12:30: (paper 149) Low Kapitza Falling Liquid Films, Miguel Alfonso Mendez, Von Karman Institute, Belgium – CES paper

12:30 – 14:00: LUNCH

Session 12b: Bubbles, drops and films

Chairmen: A. Cockx and Frédéric Risso

14:00 – 14:30: Keynote: (paper 260) Cutting bubbles with a wire mesh, Maike W. Baltussen, Eindhoven University of Technology, The Netherlands

14:30 – 14:50: (paper 132) Impact of buoyancy and vapor/liquid equilibrium on spherical gas bubble dissolution in microchannels, Javier Rivero, Université libre de Bruxelles, Belgium

14:50 – 15:10: (paper 96) Visualization and characterization gas-liquid mass transfer around Taylor bubbles flowing in meandering millimetric reactors, Nicolas Dietrich, INSA Toulouse, France

15:10 – 15:40: Coffee Break

15:40 – 16:00: (paper 206) Comparative study of a spray with optical probe and high-speed camera, Kritchart Wongwailikhit, INSA Toulouse, France

16:00 – 16:20: (paper 214) Numerical method for insoluble surfactant transport and Marangoni effect – application to bubble rising in stagnant infinite liquids and in microchannels, Omer Atasi, Université libre de Bruxelles, Belgium

16:20 – 16:40: (paper 225) Gas-liquid exchanges in the human lungs – analogy with Chemical Engineering, Cyril Karamaoun, Université libre de Bruxelles, Belgium

16:40 – 17:00: (paper 272) CFD study on alternating droplet generation for liquid-liquid microreactor application, Arnab Atta, Indian Institute of Technology Kharagpur, India

17:00 – 17:20: (paper 251) Coupling of the Local Front Reconstruction Method with a Film Drainage Model, Adnan H. Rajkotwala, Eindhoven University of Technology, The Netherlands

Session 22a: Packed beds and trickle beds

Chairmen: F. Larachi and D. Toye

09:30 – 10:00: Keynote: (paper 72) Investigation of effective interfacial area in a rotating packed bed with structured stainless steel wire mesh packing, Yong Luo, Beijing University of Chemical Technology, China – CES paper

10:00 – 10:20: (paper 21) Advanced Understanding of Local Wetting Behaviour in Gas - liquid - solid Packed Beds Using CFD with a Volume of Fluid (VOF) Method, Guangxiang He, China University of Petroleum, China – CES paper

10:20 – 10:40: (paper 98) Measurements of Local Liquid Volume Fraction Distribution and Flow Structures in a Trickle Bed using Electrical Resistance Tomography and Voidage Probes, Ekta Jain, Indian Institute of Technology Delhi, India

10:40 – 11:10: Coffee Break

11:10 – 11:30: (paper 270) Experimental and CFD Analysis of Particle-Scale Flow and RTD in Packed Beds, Vivek V. Buwa, Indian Institute of Technology Delhi, India

11:30 – 11:50: (paper 253) CFD analysis of liquid distribution in periodically operated packed bed reactors, Soumendu Dasgupta, Indian Institute of Technology Kharagpur, India

11:50 – 12:10: 3D numerical simulation of a rotating packed bed with structured stainless steel wire mesh packing, Yi Liu, Beijing University of Chemical Technology, China – CES paper

12:10 – 12:30: (paper 205) Local Liquid Distribution in Trickle Beds: ERT Measurements and CFD Simulations, Vivek Buwa, Indian Institute of Technology Delhi, India

12:30 – 14:00: LUNCH

Session 22b: Bubble columns and fluidized beds

Chairmen: J. Joshi and T. Wang

14:00 – 14:30:Keynote: (paper 228) Local Hydrodynamics, Mixing and Mass Transfer in Bubble Columns with Internals, Felix Moeller, Helmholtz-Zentrum Dresden-Rossendorf, Germany

14:30 – 14:50: (paper 221) Global hydrodynamics and gas-liquid transfer for various fluids in a thin-gap bubble column, Charlène Thobie, Laboratoire GEPEA, France

14:50 – 15:10: (paper 269) X-ray techniques to study hydrodynamics of dense bubbly flows in airlift bubble column, Manas M. Mandalahalli, Delft University of Technology, The Netherlands

15:10 – 15:40: Coffee Break

15:40 – 16:00: (paper 62) Settling/rising of a foreign particle in solid-liquid fluidized beds: Application of dynamic mesh technique, Geoffrey Evans, University of Newcastle, Australia – CES paper

16:00 – 16:20: (paper 267) Characterization of Dynamics of Unary and Binary Gas-solid Flow in a Cylindrical Fluidized Bed using Electrical Capacitance Tomography, Brajesh K. Singh, Indian Institute of Technology Delhi, India

16:20 – 16:40:(paper 3) Impact of catalyst density distribution on the fluid dynamics of an ebullated bed operating at high gas holdup conditions, Arturo Macchi, University of Ottawa, Canada – CES paper

16:40 – 17:00: (paper 28) Horizontal Immersed Heater-to-Bed Heat Transfer with Layer Inversion in Gas-Liquid-Solid Fluidized Beds of Binary Solids, Dong Hyun Lee, Sungkyunkwan University, Republic of Korea – CES paper

17:00 – 17:20: (paper 222) Flow regime transition in a high pressure fluidized bed, Ying Han, Beijing Research Institute of Petroleum Processing, China

Session 32a: Bioreactors, bioresource engineering and water treatment

Chairmen: F. Debaste and J. Texeira

09:30 – 10:00: Keynote: Biochemical engineering’s grand adventure, Henk Noorman, DSM, The Netherlands – CES paper

10:00 – 10:20: (paper 27) Euler-Lagrange analysis towards representative down-scaling of a 22 m3 aerobic S. cerevisiae fermentation, Cees Haringa, TU Delft, The Netherlands

10:20 – 10:40: (paper 115) Influence of liquid phase hydrodynamics on biofilm formation on structured packing: Optimisation of surfactin production from Bacillus amyloliquefaciens, Frank Delvigne, University of Liège, Belgium – CES paper

10:40 – 11:10: Coffee Break

11:10 – 11:30: (paper 135) A new bioreactor design for culturing basidiomycetes: mycelial biomass production in submerged cultures of Ceriporiopsis subvermispora, Arnaldo Marcio Ramalho Prata, University of São Paulo, Brazil – CES paper

11:30 – 11:50: (paper 138) Mixing and liquid-to-gas mass transfer under digester operating conditions, Christophe Vial, Université Clermont Auvergne, France – CES paper

11:50 – 12:10: (paper 148) Enhanced Oxygen Delivery to a Multiphase Continuous Bioreactor, Thomas R. Hanley, Auburn University, USA – CES paper

12:10 – 12:30: (paper 18) Study of spray absorption for food aroma recovery, Frédéric Debaste, Université Libre de Bruxelles (Belgium)

12:30 – 14:00: LUNCH

Session 32b: Bioreactors, bioresource engineering and water treatment

Chairmen: F. Delvigne and H. Noorman

14:00 – 14:30: Keynote: (paper 277) Solid-Liquid and Gas-Liquid Mass Transfer of PAHs in Soil-Slurry Bioreactors, Douglas O.Pino-Herrera, Université Paris-Est, France

14:30 – 14:50: (paper 79) Modeling and design of a process for estrogenicity removal by immobilized laccases in a packed-bed reactor, Rosalie Pype, Université libre de Bruxelles (Belgium)

14:50 – 15:10: (paper 14) The Role of Gas/Liquid Contacting in Water/Wastewater Ozonation, Adam Donaldson, Dalhaousie University, Canada

15:10 – 15:40: Coffee Break

15:40 – 16:00: (paper 212) Novel External Loop Inverse Fluidized Bed Airlift for Biochemical Reactors, Iman Mohammed, TU Dresden, Germany 

16:00 – 16:20: (paper 81) Assessing moment methods for the simulation of population dynamics in large-scale bioreactors, Maxime Pigou, INSA Toulouse, France

16:20– 16:40: (paper 146) Oxygen transfer in activated sludge reactors: Comparative impact of the non-Newtonian behaviour on fine and coarse bubble performances, Yannick Fayolle, Irstea, France

16:40– 17:00: (paper 208) Hydrodynamic analysis of gas-liquid flow in a novel bioreactor equipped with the coaxial mixer through tomography and CFD, Farhad Ein-Mozaffari, Ryerson University, Canada